Skip to content

Istio

Istio is a service mesh that offers a rich feature-set to control the flow of traffic to a web service. Istio offers this functionality through a set of CRDs, and Argo Rollouts automates the management of these resources to provide advanced traffic shaping capabilities to the different versions of the Rollout during an update.

How it works

Traffic splitting is accomplished in Istio by adjusting traffic weights defined in an Istio VirtualService. When using Argo Rollouts with Istio, a user deploys a VirtualService containing at least one HTTP route containing two HTTP route destinations: a route destination targeting the pods of canary ReplicaSet, and a route destination targeting the pods stable ReplicaSet. Istio provides two approaches for weighted traffic splitting, both approaches are available as options in Argo Rollouts:

  1. Host-level traffic splitting
  2. Subset-level traffic splitting

Host-level Traffic Splitting

The first approach to traffic splitting using Argo Rollouts and Istio, is splitting between two hostnames, or Kubernetes Services: a canary Service and a stable Service. This approach is similar to the way all other Argo Rollouts mesh/ingress-controller integrations work (e.g. ALB, SMI, Nginx). Using this approach, the user is required to deploy the following resources:

  • Rollout
  • Service (canary)
  • Service (stable)
  • VirtualService

The Rollout should define the following fields:

apiVersion: argoproj.io/v1alpha1
kind: Rollout
metadata:
  name: rollout-example
spec:
  ...
  strategy:
    canary:
      canaryService: canary-svc  # required
      stableService: stable-svc  # required
      trafficRouting:
        istio:
          virtualService:
            name: rollout-vsvc   # required
            routes:
            - primary            # optional if there is a single route in VirtualService, required otherwise
      steps:
      - setWeight: 5
      - pause:
          duration: 10m

The VirtualService must contain an HTTP route with a name referenced in the Rollout, containing two route destinations with host values that match the canaryService and stableService referenced in the Rollout. If the VirtualService is defined in a different namespace than the rollout, its name should be rollout-vsvc.<vsvc namespace name>. Note that Istio requires that all weights add to 100, so the initial weights can be 100% to stable, and 0% to canary.

apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: rollout-vsvc
spec:
  gateways:
  - istio-rollout-gateway
  hosts:
  - istio-rollout.dev.argoproj.io
  http:
  - name: primary        # referenced in canary.trafficRouting.istio.virtualService.routes
    route:
    - destination:
        host: stable-svc # referenced in canary.stableService
      weight: 100
    - destination:
        host: canary-svc # referenced in canary.canaryService
      weight: 0

Finally, a canary and stable Service should be deployed. The selector of these Services will be modified by the Rollout during an update to target the canary and stable ReplicaSet pods. Note that if the VirtualService and destination host resides in different namespaces (e.g., VirtualService and Rollout are not in the same namespace), the namespace should be included in the destination host (e.g. stable-svc.<namespace>).

apiVersion: v1
kind: Service
metadata:
  name: canary-svc
spec:
  ports:
  - port: 80
    targetPort: http
    protocol: TCP
    name: http
  selector:
    app: rollouts-demo
    # This selector will be updated with the pod-template-hash of the canary ReplicaSet. e.g.:
    # rollouts-pod-template-hash: 7bf84f9696
---
apiVersion: v1
kind: Service
metadata:
  name: stable-svc
spec:
  ports:
  - port: 80
    targetPort: http
    protocol: TCP
    name: http
  selector:
    app: rollouts-demo
    # This selector will be updated with the pod-template-hash of the stable ReplicaSet. e.g.:
    # rollouts-pod-template-hash: 123746c88d

During the lifecycle of a Rollout update, Argo Rollouts will continuously:

  • modify the canary Service spec.selector to contain the rollouts-pod-template-hash label of the canary ReplicaSet
  • modify the stable Service spec.selector to contain the rollouts-pod-template-hash label of the stable ReplicaSet
  • modify the VirtualService spec.http[].route[].weight to match the current desired canary weight

Note

Rollout does not make any other assumptions about the fields within the VirtualService or the Istio mesh. The user could specify additional configurations for the VirtualService like URI rewrite rules on the primary route or any other route if desired. The user can also create specific DestinationRules for each of the services.

Subset-level Traffic Splitting

Important

Available since v1.0

The second approach to traffic splitting using Argo Rollouts and Istio, is splitting between two Istio DestinationRule Subsets: a canary subset and a stable subset. When splitting by DestinationRule subsets, the user is required to deploy the following resources:

  • Rollout
  • Service
  • VirtualService
  • DestinationRule

The Rollout should define the following fields:

apiVersion: argoproj.io/v1alpha1
kind: Rollout
metadata:
  name: rollout-example
spec:
  ...
  strategy:
    canary:
      trafficRouting:
        istio:
          virtualService:
            name: rollout-vsvc        # required
            routes:
            - primary                 # optional if there is a single route in VirtualService, required otherwise
          destinationRule:
            name: rollout-destrule    # required
            canarySubsetName: canary  # required
            stableSubsetName: stable  # required
      steps:
      - setWeight: 5
      - pause:
          duration: 10m

A single service should be defined, which targets the Rollout pods. Note that unlike the first approach, where traffic splitting is against multiple Services which are modified to contain the rollout-pod-template-hash of the canary/stable ReplicaSets, this Service is not modified by the rollout controller.

apiVersion: v1
kind: Service
metadata:
  name: rollout-example
spec:
  ports:
  - port: 80
    targetPort: http
    protocol: TCP
    name: http
  selector:
    app: rollout-example

The VirtualService must contain an HTTP route with a name referenced in the Rollout, containing two route destinations with subset values that match the canarySubsetName and stableSubsetName referenced in the Rollout. Note that Istio requires that all weights add to 100, so the initial weights can be 100% to stable, and 0% to canary.

apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: rollout-vsvc
spec:
  gateways:
  - istio-rollout-gateway
  hosts:
  - istio-rollout.dev.argoproj.io
  http:
  - name: primary       # referenced in canary.trafficRouting.istio.virtualService.routes
    route:
    - destination:
        host: rollout-example
        subset: stable  # referenced in canary.trafficRouting.istio.destinationRule.stableSubsetName
      weight: 100
    - destination:
        host: rollout-example
        subset: canary  # referenced in canary.trafficRouting.istio.destinationRule.canarySubsetName
      weight: 0

Finally, the DestinationRule containing the canary and stable subsets referenced in the Rollout.

apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: rollout-destrule
spec:
  host: rollout-example
  subsets:
  - name: canary   # referenced in canary.trafficRouting.istio.destinationRule.canarySubsetName
    labels:        # labels will be injected with canary rollouts-pod-template-hash value
      app: rollout-example
  - name: stable   # referenced in canary.trafficRouting.istio.destinationRule.stableSubsetName
    labels:        # labels will be injected with stable rollouts-pod-template-hash value
      app: rollout-example

During the lifecycle of a Rollout using Istio DestinationRule, Argo Rollouts will continuously:

  • modify the VirtualService spec.http[].route[].weight to match the current desired canary weight
  • modify the DestinationRule spec.subsets[].labels to contain the rollouts-pod-template-hash label of the canary and stable ReplicaSets

TCP Traffic Splitting

Important

Available since v1.2.2

Support for splitting TCP traffic was introduced and requires the Rollout to define the following fields:

apiVersion: argoproj.io/v1alpha1
kind: Rollout
metadata:
  name: rollout-example
spec:
  ...
  strategy:
    canary:
      canaryService: canary-svc  # required
      stableService: stable-svc  # required
      trafficRouting:
        istio:
          virtualService:
            name: rollout-vsvc   # required
            tcpRoutes:
              # Below fields are optional but if defined, they should match exactly with at least one of the TCP route match rules in your VirtualService
              - port: 3000 # Only required if you want to match any rule in your VirtualService which contains this port
      steps:
      - setWeight: 5
      - pause:
          duration: 10m

The VirtualService must contain a TCP route with a matching port referenced in the Rollout

apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: rollout-vsvc
spec:
  gateways:
    - istio-rollout-gateway
  hosts:
    - istio-rollout.dev.argoproj.io
  tcp:
    - match:
        - port: 3000
      route:
        - destination:
            host: stable-svc # referenced in canary.stableService
          weight: 100
        - destination:
            host: canary-svc # referenced in canary.canaryService
          weight: 0

Multicluster Setup

If you have Istio multicluster setup where the primary Istio cluster is different than the cluster where the Argo Rollout controller is running, then you need to do the following setup:

  1. Create a ServiceAccount in the Istio primary cluster.
    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: argo-rollouts-istio-primary
      namespace: <any-namespace-preferrably-config-namespace>
    
  2. Create a ClusterRole that provides access to Rollout controller in the Istio primary cluster.
    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: argo-rollouts-istio-primary
    rules:
    - apiGroups:
      - networking.istio.io
      resources:
      - virtualservices
      - destinationrules
      verbs:
      - get
      - list
      - watch
      - update
      - patch
    
    Note: If Argo Rollout controller is also installed in the Istio primary cluster, then you can reuse the argo-rollouts-clusterrole ClusterRole instead of creating a new one.
  3. Link the ClusterRole with the ServiceAccount in the Istio primary cluster.
    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: argo-rollouts-istio-primary
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: ClusterRole
      name: argo-rollouts-istio-primary
    subjects:
    - kind: ServiceAccount
      name: argo-rollouts-istio-primary
      namespace: <namespace-of-the-service-account>
    
  4. Now, use the following command to generate a secret for Rollout controller to access the Istio primary cluster. This secret will be applied to the cluster where Argo Rollout is running (i.e, Istio remote cluster), but will be generated from the Istio primary cluster. This secret can be generated right after Step 1, it only requires ServiceAccount to exist. Reference to the command.
    istioctl x create-remote-secret --type remote --name <cluster-name> \
        --namespace <namespace-of-the-service-account> \
        --service-account <service-account-created-in-step1> \
        --context="<ISTIO_PRIMARY_CLUSTER>" | \
        kubectl apply -f - --context="<ARGO_ROLLOUT_CLUSTER/ISTIO_REMOTE_CLUSTER>"
    
  5. Label the secret.
    kubectl label secret <istio-remote-secret> istio.argoproj.io/primary-cluster="true" -n <namespace-of-the-secret>
    

Comparison Between Approaches

There are some advantages and disadvantages of host-level traffic splitting vs. subset-level traffic splitting.

DNS requirements

With host-level splitting, the VirtualService requires different host values to split among the two destinations. However, using two host values implies the use of different DNS names (one for the canary, the other for the stable). For north-south traffic, which reaches the Service through the Istio Gateway, having multiple DNS names to reach the canary vs. stable pods may not matter. However, for east-west or intra-cluster traffic, it forces microservice-to-microservice communication to choose whether to hit the stable or the canary DNS name, go through the gateway, or add DNS entries for the VirtualServices. In this situation, the DestinationRule subset traffic splitting would be a better option for intra-cluster canarying.

Metrics

Depending on the choice of host-level splitting vs. subset-level splitting, there will be different styles of prometheus metrics available. For example, if using host-level splitting, the metrics of the canary vs. stable would appear in the Istio Service metrics dashboard:

Istio Service Metrics

On the other hand, when splitting via subsets, it would be necessary to query prometheus using different parameters, such as the workload name:

Istio Workload Metrics

Integrating with GitOps

Earlier it was explained that VirtualServices should be deployed with an initial canary and stable weight of 0 and 100, respectively, such as in the following example:

  http:
  - name: primary
    route:
    - destination:
        host: stable-svc
      weight: 100
    - destination:
        host: canary-svc
      weight: 0

This introduces a problem for users practicing GitOps. Since a Rollout will modify these VirtualService weights as the Rollout progresses through its steps, it unfortunately causes the VirtualService to become OutOfSync with the version in git. Additionally, if the VirtualService in git were to be applied while the Rollout is in this state (splitting traffic between the services), the apply would revert the weights back to the values in git (i.e. 100 to stable, 0 to canary).

One protection which is implemented in Argo Rollouts, is that it continually watches for changes to managed VirtualServices. In the event that a kubectl apply were to happen using the VirtualService in git, the change would be detected immediately by the rollout controller, and the controller will instantly set the VirtualService weights back to the canary weight appropriate for the given step of the Rollout. But since there is momentary flapping of weights, this behavior should be understood.

Some best practices to follow when using Argo CD with Argo Rollouts to prevent this behavior, is to leverage the following Argo CD features:

  1. Configure the application to ignore differences in the VirtualService. e.g.:

    apiVersion: argoproj.io/v1alpha1
    kind: Application
    metadata:
      name: guestbook
    spec:
      ignoreDifferences:
      - group: networking.istio.io
        kind: VirtualService
        jsonPointers:
        - /spec/http/0
    

    Ignoring the differences in the VirtualServices HTTP route, prevents gitops differences in the VirtualService HTTP routes to contribute to the overall sync status of the Argo CD application. This adds the additional benefit of prevent auto-sync operations from being triggered.

  2. Configure the Application to only apply OutOfSync resources:

    apiVersion: argoproj.io/v1alpha1
    kind: Application
    metadata:
      name: guestbook
    spec:
      syncPolicy:
        syncOptions:
        - ApplyOutOfSyncOnly=true
    

    By default, when Argo CD syncs an application, it runs kubectl apply against all resources in git which are part of the application. The ApplyOutOfSyncOnly=true sync option indicates to Argo CD to skip applying resources which it already considers Synced, and only apply the ones which are OutOfSync. This option, when used in conjunction with the ignoreDifferences feature, provides a way to manage the conflict in the desired state of a VirtualService between Argo CD and Argo Rollouts.

Argo CD also has an open issue here which would help address this problem. The proposed solution is to introduce an annotation to resources, which indicates to Argo CD to respect and preserve the differences at a specified path, in order to allow other controllers (e.g. Argo Rollouts) controller manage them instead.

Alternatives Considered

Rollout ownership over the Virtual Service

An early design alternative was that instead of the controller modifying a referenced VirtualService, the Rollout controller would create, manage, and own a Virtual Service. While this approach is GitOps friendly, it introduces other issues:

  • To provide the same flexibility as referencing VirtualService within a Rollout, the Rollout needs to inline a large portion of the Istio spec. However, networking is outside the responsibility of the Rollout and makes the Rollout spec unnecessarily complicated.
  • If Istio introduces a feature, that feature will not be available in Argo Rollouts until implemented within Argo Rollouts.

Both of these issues adds more complexity to the users and Argo Rollouts developers compared to referencing a Virtual Service.

Istio support through the SMI Adapter for Istio

SMI is the Service Mesh Interface, which serves as a standard interface for all common features of a service mesh. This feature is GitOps friendly, but native Istio has extra functionality that SMI does not currently provide.